Reinforcement and reconstruction of existing building structures

Reinforcement and reconstruction of existing building structures

Project Overview

This project is a second-class construction project with a total of 5 floors, including 4 floors above ground and 1 floor underground. The area of the building to be renovated is 2,000 square meters. The building is a brick-concrete structure, and the area to be renovated is 3~4 floors. In addition, building roof waterproofing, drainage and electrical engineering should also be reformed. The results of the engineering survey show that the construction site is relatively concentrated in the area where the project is located, and it is difficult to construct in sections. Therefore, it is necessary to treat the project as a whole and adjust the building structure to improve the stability of the building.



Construction plan for structural strengthening and rebuilding existing buildings



Rebar construction

post installed rebar

HM-500 injectable anchoring adhesive



Concrete spraying construction

Concrete spraying construction



Carbon fiber reinforced construction

Carbon fiber reinforced construction

HM-20 unidirectional carbon fiber fabric



Bonded steel reinforcement construction

Sticky steel reinforcement construction

HM-120 steel bonding adhesive



Crack repair construction

crack repair.jpg

HM-120ML crack injection adhesive



The results show that the quality of the reinforcement of the building has reached the standard, and problems such as cracks in the wall have been solved. After the building was used for 1 year, the project evaluated the building quality again, and there was no abnormality. The above results indicate that the construction plan adopted by this project is feasible, and has confirmed the application value of various construction plans such as planting reinforcement, concrete spraying, carbon fiber reinforcement, steel bonding reinforcement, and crack repair.




Conclusion 

In summary, this project applies various construction structural reinforcement construction plans to the process of structural transformation, which not only relieves the building diseases, but also improves the stability of the building and helps to extend the life of the building. The stability of existing buildings can be further improved.


Horse Construction Recommended Products

You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.

HM-120 Steel Bonding Adhesive

Two-component epoxy modified epoxy structural strengthening adhesive for bonded steel plate to concrete

See more >

HM-30 Unidirectional Carbon Fiber Fabric

High strength, unidirectional carbon fiber fabric pre-saturated to form a carbon fiber reinforced polymer (CFRP) fabric used to strengthen structural concrete elements.

See more >

HM-500 Injection Anchoring Adhesive

Two-components modified epoxy resin adhesive, with high quality plastic tube, double cartridge package for anchoring

See more >

Back
Top
Close