How To Deal With Concrete Surface For Steel Plate Reinforcement?

How To Deal With The Concrete Surface For Sticking Steel Reinforcement?


In the construction of bonded steel reinforcement, one step is to clean the surface of the concrete, that is, the cleaning of the contact surface of the bonded steel reinforcement. What are the differences in construction details for different concrete surfaces?


1 Oily concrete surface

Before proceeding with the bonding steel reinforcement construction, the concrete contact surface needs to be cleaned. The oil stains need to be cleaned with special materials. We can use a brush dipped in acetone or ethanol to clean the oil stains on the concrete surface. After the greasy dirt is cleaned, wash it twice with clean water, and then polish the surface of the concrete smoothly to a depth of about 2 to 3 mm, until you can see the new concrete exposed.


2 The surface of the concrete that has been carbonized

For this kind of concrete surface, it can be directly polished. After the new concrete surface is exposed, an air compressor can be used to remove the dust. After drying, it can be wiped clean with acetone to carry out the construction of sticking steel reinforcement.


3 Concrete surface with high humidity

The high humidity will directly affect the construction effect of the bonding steel reinforcement. For the concrete surface with high humidity, it needs to be dried before the bonding steel reinforcement construction can be carried out.


4 The concrete surface with corroded steel bars has been exposed

For this type of concrete, the rust on the surface of the exposed steel bars needs to be cleaned before cleaning the concrete, and then the construction can be started after repairing.

After talking about the common concrete surface treatment methods, what are the targeted treatment methods for different steel materials?


5 Corroded steel plate

For heavily rusted steel plates, you can use hydrochloric acid soaking. Generally, after 20 minutes of soaking, the rust spots will fall off and you can start construction.


6 Uncorroded steel plate or small area of rusted steel plate

For this type of steel plate, the surface can be cleaned by sandblasting, etc., until the metal luster appears on the surface of the steel plate. After polishing, wipe it clean with acetone.



Of course, don't forget to protect after construction. After reinforcement, the steel plate should be painted with 20mm thick M15 cement mortar to protect it, or it can be protected with anti-rust paint to avoid steel corrosion.

Horse Construction Recommended Products

You can find anything here you are in need of, have a trust trying on these products, you will find the big difference after that.

HM-120 Steel Bonding Adhesive

Two-component epoxy modified epoxy structural strengthening adhesive for bonded steel plate to concrete

See more >

HM-120M Steel Jacketing Adhesive

Modified epoxy resin structural perfusion adhesive, specifically for supporting adhesive bonded steel reinforcement

See more >

HM-60 Unidirectional Carbon Fiber Sheet

High strength, unidirectional carbon fiber sheet pre-saturated to form a carbon fiber reinforced polymer (CFRP) sheet used to strengthen structural concrete elements.

See more >

Back
Top
Close